Installing an epoxy garage floor involves several key steps to ensure a flawless, long-lasting finish.

Here’s a general overview of the process:

Step 1: Prep the Surface

Applying epoxy coatings requires precision and expertise. At Custom Concrete Design LLC, we take every step necessary to ensure the best results for your surfaces. The process begins with Shot blasting and/or Diamond Grinding the Entire Concrete Surface, we then shop vac thoroughly which cleans and prepares the concrete. This helps remove any dirt, grime, or old coatings that could interfere with the epoxy's adhesion and it allows the material to wick down into the pores of the concrete slab, to create the necessary bond between the concrete and epoxy material and a smooth open clean surface is key for long-term durability.

Step 2: Mix and Apply the Epoxy Base Coat

We apply the base layer of epoxy and or MVB (moisture vapor barrier) IF needed, once the primer coat has cured, the epoxy coating is prepared and applied to the garage floor. Following the manufacturer's instructions, the epoxy is mixed and then spread evenly using a squeegee then a roller one way and cross hatching the other way with that roller. This ensures a smooth, uniform finish across the entire surface.

Step 3: Broadcast the Flakes to 100% Coverage 

Here’s where the magic happens! While the epoxy is still wet, we generously throw flakes (by hand or using a broadcast gun) until no wet epoxy is visible. This ensures full, even coverage. We’ll go heavy on the flakes to create a seamless, durable finish.

Step 4: Scrape and Remove Excess Flakes

After the epoxy cures (typically overnight), we use a floor scraper to knock down any loose or standing flakes, then vacuum up the excess. This leaves a nice, even surface.

Step 5: Apply the Clear Topcoat

Finally, we roll on a high-quality clear topcoat to seal everything in. This top layer adds durability, chemical resistance, and a glossy or satin finish, depending on your preference.

Final Result!

After application, we allow the epoxy to cure properly—1 day for foot traffic, 2 days before placing heavy objects, and 5 days for vehicle use. Once fully cured, your garage floor is ready to go! You’ll have a stunning, long-lasting epoxy flake floor that not only looks amazing but also stands up to daily wear and tear. Whether it’s a high-traffic workspace or a stylish upgrade for your home, our epoxy coatings are stain-resistant, easy to clean, and built for durability and style! 

The entire installation process typically takes 4 days to complete, including time for the epoxy coating to cure properly. It’s important to note that the installation process may vary depending on the specific product used and the condition of the garage floor. A professional epoxy garage floor installer can provide detailed information on the installation process and answer any questions you may have.